Josef Eberle "Yellow 13"....

[Lucky13]

Best way to achieve these stripes in 1/32?
Tried already, but they're too....fat!!
Gonna repaint her again!
B*llocks!

 

[Crimea_River]

Just gotta get the nozzle tip closer Jan. Thin paint and low pressure too.

 

[Torch]

Don't care if you think you screwed up. really nice project....

 

[Lucky13]

50/50 too thin? 60/40?
Also seen, that people ad a drop or of washing up liquid....

Much obliged gentlemen...

 

[Airframes]

Do a test with 50/50. If it is a bit too stark, then try thinning 60 thinners to 40 paint.
I have to do a similar scheme in 1/48th scale, and tried 50/50 using enamels, which was fine. Spraying pressure was around 15 psi.

 

[stona]

When I do such things I don't change anything in my paint thinning or airbrush pressure. I just spray exactly as I would anything else. Obviously you need to get in close to achieve thin lines.

Cheers

Steve