Tamiya 1:48 Nakajima A6M2-N Kit #61016 (2 Viewers)

[fubar57]

It really is a nice set, Jesse. Until this build I was unaware of the primer on Japanese aircraft. I am sorely tempted to add this to my "naked" collection....time will tell

​

Anyhoo....modellin'. The wing fuselage join is not the best. I may be able to pull the wings up but not sure if it will produce too much dihedral

​

The rear of the wings on the bottom almost fall into the fuselage so some help is needed

​

A bit of plastic will be added

 

[Wurger]

 

[fubar57]

Looks like I have a lot of room; dihedral is quite flat as is. I checked out three different 3-views and they're all similar

 

[Gnomey]

Lovely work so far George!

 

[Boom]

Good grief, the effort and attention to detail shown so far is amazing.

When I think back to my efforts back in the '70s, making Airfix 1/72 kits, I cringe in horror!

 

[Crimea_River]

These joints are not beyond your abilities Geo. Im sure they will come out fine.

 

[fubar57]

Thanks guys. Just finished spraying the cowling and anti-glare under the clear parts with Tamiya XF69 NATO Black. I found out last week that Mitsubishi had the black with blue tinge on the cowling and Nakajima had semi to gloss black. anyhoo....previously I painted the cowling Tamiya Aluminum and over-coated with hairspray. Film shortly

 

[fubar57]

Before shot

​

Forgot to mention earlier, another thing I have found out is that the cowlings never had primer, just paint over metal. So be it. Chipping done. Some of what you see is toilet paper residue. I dampened a sheet of T.P. and wrapped it around the part for about three minutes. I think if I had left it on longer I would have had bigger chips but as mentioned before, this was a water craft so not much to cause chipping. Maybe on shore during maintenance when the engine was run up

I'll let this dry completely, remove the floof and then put on a semi-gloss coat

 

[talbot]

Nicely done Geo!

 

[Crimea_River]

Beauty. Have you found any difference between hairspray and the more expensive commercial chipping solutions?

 

[fubar57]

Thanks guys. Andy, Crimea_River Still on the fence about the chipping medium though to be honest, I may have applied it to thick and got the timing wrong. I've got a 1:48 A-bomb doing nothing in the spares box so I'll test it out in earnest. It may be, that its Vallejo, it works best with Vallejo paints. I'll test it shortly

 

[fubar57]

This will be the test subject, "Little Boy"

​

On the left is what a lot of the kids are using for the A6M and also recommended. Life is too short so its what I'll be using for Tamiya over primer red. On the right is just a bottle of Vallejo thats close; just for testing purposes

​

YIKES....that's a close-up. Cowling done with W&N Satin Varnish on the right. I like it

 

[fubar57]

The testing begins. Ignore the colour. I was trialling a Hinomaru mix, Tamiya Red and Red Brown. 1:1. It didn't look good in the cup and worse over black. The plan is to wait for this to set and then cover half of each part with hairspray and the other half with the chipping medium. Then I'll paint one piece with Tamiya and the other with Vallejo. Wait for an hour and then let the chipping begin

 

[talbot]

cool, interested to see how this plays out

 

[SaparotRob]

This will be the test subject, "Little Boy"

View attachment 888251
​

On the left is what a lot of the kids are using for the A6M and also recommended. Life is too short so its what I'll be using for Tamiya over primer red. On the right is just a bottle of Vallejo thats close; just for testing purposes

View attachment 888252
​

YIKES....that's a close-up. Cowling done with W&N Satin Varnish on the right. I like it

View attachment 888253​

It's quite Zekey.

 

[fubar57]

Très Zekey. Small update, hairspray on the left, chipping medium on the right. Hairsprays seems to act like a flat coat

 

[fubar57]

So we start, Tamiya XF12 J.N. Grey on top, Vallejo Model Color Deck Tan below. I couldn't find my Vallejo thinner so I used one of the empty Army Painter bottles, put water in it and winged it. Not sure what's going to happen

Chipping shortly

 

[fubar57]

Okay, we have Vallejo on the left, Tamiya on the right, hairspray on the top and Vallejo chipping medium on the bottom. I wrapped some damp paper towel around both for 3 minutes and started. The hairspray wouldn't budge so I wrapped some more on the tops for two more minutes. As can be seen, Vallejo on Vallejo got some nice chips, Tamiya over Vallejo got some chips but not so much. Vallejo over hairspray went to plastic on the larger chips and Tamiya over hairspray went straight to plastic. I don't have any practice at all with chipping so you shouldn't put anything into this experiment though as I expected, Vallejo over Vallejo worked really well

 

[Wurger]

 

[talbot]

Interesting that both hairspray went to plastic, would seem the hairspray affected the tamiya base if im understanding correctly

Agree with the vallejo over vallejo looks best