What's on The Workbench (6 Viewers)

[A4K]

Looks good Geo.

 

[Wayne Little]

Yep not bad at all..!

 

[Wurger]

 

[T Bolt]

Looking good George

 

[fubar57]

Thanks guys. Doing some detail painting and while waiting for it to dry I was looking at my pics of 7B⦾V and 7B⦾Z, I notice something on the tail that is not on the painting diagrams and if I can figure it out, this will be unique, I think, from the other builds. First up, the paint sheet with the area in question

​

and the pics, first "V"

​

and "Z"

​

Thoughts?

 

[Wurger]

Geo , do you mean the lighter area above the fin flashes?

 

[fubar57]

Yes. Just had a closer look, camo colour, rudder tilted away?

 

[A4K]

That's what I think Geo.

 

[Wurger]

Yes. Just had a closer look, camo colour, rudder tilted away?

Yes Pal. It is the light trick. The sunlight is going from the top and front and the rudder is tilted left showing us the side in the shadow. In the pic of the MB858 you may see the opposite effect. The sunlight is from the top and back while the rudder is tilted right. So it shows us the lighter tone being lighted.

What is more, in a couple of pictures it may seem that the area above the fin flash was painted with a paint of a lighter tone. But again it is a light trick caused by the difference in a kind of the covering there. The rudder was covered with a fabric while the fin with a metal plate. The paint on the metal surface seems to be more "smooth" and clean while the one on the more rough.

However in a pic without the light and shadow the colour looks the same. Although it can be noticed that the fabric skin of the rudder looks just a little bit darker due to the different material and moisture with a dirt on it.

 

[fubar57]

Merci mon ami, boring bog standard camo it is

 

[fubar57]

Just thought I would pop this in for thoughts. The frame is the four paint mix and the sprue nub is XF-76 on its own. The Airfix instructions call for Humbrol 90 for the interior and this is very close to that

 

[Wurger]

IIRC the cockpit green should be the Humbrol 78 or what is better, a mix of the Humbrol 78+90. Also a mix I found on the IPMS Stckholm side a couple of years ago. In fact, straight Humbrol 78 is plenty close enough.

6 parts H78 cockpit green
3 parts H34 white
1 part H72 khaki drill

 

[fubar57]

Airfix must have listened to Edgar for the Mk.Xll. All the 78s are now 90s

 

[Wurger]

Airfix must have listened to Edgar for the Mk.Xll. All the 78s are now 90s

View attachment 817847

View attachment 817848​

You may be right. But still the HU90 at the cockpit looks odd to me.

 

[fubar57]

Back to the 109. Three pounds of masking tape later, I Spritzed the exhaust stain cover-uppers or whatever it is they are called. I used Tamiya XF-63 German Grey. I chose this colour as the spinner is black and will be spritzed Nato Black

​

Once dry, its time for the deecals

 

[A4K]

Nice Geo. I like your jig set up too.

 

[fubar57]

Thanks Evan. I have another one but this is much better

 

[Wurger]

With Evan.

 

[Vic Balshaw]

Nice stuff George.

 

[fubar57]

Just put the ✙ on the wings, they stick like frightened limpets. I was lucky that I got them close enough