What's on The Workbench (1 Viewer)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

This is the Yokosuke D4Y1 from Fujimi. I didn't shave off enough when I connected the engine section to the fuselage. This one is a Yokosuka D4Y1-C '52' unknown unit Rabaul, New Britain 1943.
20240821_214355_HDR.jpg

20240821_214355_HDR.jpg
 
This is the Aoshima version of the Kawanishi N1K2. This was part of a $200 Japanese airplane kit lot I purchased in 2018 through this guy I dealt with off of EBay (who was my liaison to the other guy doing the selling) after chatting a few times. It had about 15 kits in the lot with varied plane types. I don't think I realized how lucky I was to get it until now. There were some that were missing canopies and the guy who I always chatted with purchased them and sent them to me. Several had PE and bonus parts that came inside the kits. Anyhow, this is a Kawanishi N1K2-J from the 343rd Ku 501st Hikotai.
20240821_200903_HDR.jpg
20240821_200837_HDR.jpg


20240821_200847_HDR.jpg
 
Dang it Jessie, we all get together a building allied planes and we can't take on your Japanese air forces...
 
Love me some Peanut Butter & Jelly bombers. Looking real nice. I'm no expert on weathering myself just experiment. Lay down an of clear coat, (ie acrylic before using enamel so you can clean up what you did if you don't like it..
I am looking at the Flory ATTM on YT the bottle is H2O based so the lacquer varnish is good for that the bottle has an AB on it??Hence YT tonight might be a nice way to lighten upper surfaces.....and yes PBJ's are cool the instructions called for silver gear hubs I've never seen a Marine plane and almost all Navy in WWII was White;)
 
This is the Aoshima version of the Kawanishi N1K2. This was part of a $200 Japanese airplane kit lot I purchased in 2018 through this guy I dealt with off of EBay (who was my liaison to the other guy doing the selling) after chatting a few times. It had about 15 kits in the lot with varied plane types. I don't think I realized how lucky I was to get it until now. There were some that were missing canopies and the guy who I always chatted with purchased them and sent them to me. Several had PE and bonus parts that came inside the kits. Anyhow, this is a Kawanishi N1K2-J from the 343rd Ku 501st Hikotai.
View attachment 794284View attachment 794283

View attachment 794285
Jessie your paint is getting better esp. the Green's like your thinning them down some and going multiple layers...the grey's still look a little thick for my taste.Once you master that fury stick you will be better than an AB I have seen it some guys are downright fantastic with the brush.;)
 
The Academy B25 PBJ the wings are still not glued I have a coat of Tamy semi-clear varnish on the plane on the shelf Florry's-H2O(?),AK's=white thinner then your Tamy panel wash.I just got the Florrys in the mail never used seemed the easiest maybe of all to remove?Small selection.The AK got a little bit more for this enviro even though it's met for MTO any suggestions weathering is a weak point for me.
Go slow building up the weathering, very easy to over do. Do a little bit, have a coffee (rum), come back for a second look. When you take a break, you get a fresh look and you can decide to leave as is or build it up. Nice one Jesse
 
This is the Hasegawa mold of the J2M3, quite old. The decals are from Rising Decals, one of those long hard to get sets. This is a Mitsubishi J2M3 'YOD-1163' 302 Kaigan Ku 1st Hikotai 1944.
20240821_213305_HDR.jpg

20240821_213439_HDR.jpg
 
Well it looks like I beat the deadline all that's left is the aerials.
default_biggrin.png



This was my first with Florys interesting can see some future use with them definitely easy to use but if you want more removal go gloss I went semi.
default_wink.png
 

Attachments

  • B-25J 001.JPG
    B-25J 001.JPG
    286.5 KB · Views: 8
  • B-25J 002.JPG
    B-25J 002.JPG
    274.3 KB · Views: 9
  • B-25J 003.JPG
    B-25J 003.JPG
    264.9 KB · Views: 8
  • B-25J 005.JPG
    B-25J 005.JPG
    338.7 KB · Views: 7
A Nakajima A6m2-N from Jo-Han, as bare as bones as you can get. I had to add a cockpit inside because just comes with a seat and two pins. The decals are from Print Scale and were not to my satisfaction. This is a Nakajima A6M2-N '02-103' Natsushima, Truk Island November 1943.
20240803_184551_HDR.jpg



20240803_184603_HDR.jpg
 
Well it looks like I beat the deadline all that's left is the aerials.View attachment 794392


This was my first with Florys interesting can see some future use with them definitely easy to use but if you want more removal go gloss I went semi.View attachment 794393
That's a beauty Kevin.
A Nakajima A6m2-N from Jo-Han, as bare as bones as you can get. I had to add a cockpit inside because just comes with a seat and two pins. The decals are from Print Scale and were not to my satisfaction. This is a Nakajima A6M2-N '02-103' Natsushima, Truk Island November 1943.
View attachment 794394


View attachment 794395
Another Nakajima Ki-27. I really like this plane too. This is from Hasegawa and decals are from Rising Decals. This is a Nakajima Ki-27 Otsu 1st chutai Mingaladon, Burma 1942.
View attachment 794397


View attachment 794398
A couple of nice builds Jesse, really churning them out. :lol: :lol:
 

Users who are viewing this thread

Back