A4K
Brigadier General
Those are for the Dynabolts to lock the blades in tight 
What's on The Workbench (5 Viewers)
- Thread starter Heinz
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
Donivanp
Lieutenant Colonel
Makes sense to me, but I'm the king of Siam.Those are for the Dynabolts to lock the blades in tight
Vic Balshaw
Major General
I can almost hear the rumble. Nice one Karl. 
Zippythehog
Staff Sergeant
- 985
- Jan 7, 2017
fubar57
General
Two down, three to go.
locked up a few degrees away from where I wanted it. I had no problem with the ✙
Last edited:
fubar57
General
Thank you sir
fubar57
General
As said, it locked up before I could finish and looked like it was starting to rip. I can live with it
Mine is the same! And I have a different model (the Erla G-10). It's Eduard's problem.
fubar57
General
What is annoying is that I have three other propellers on the sprue tree and they are fine
Vic Balshaw
Major General
No one except you is going to notice the decal George. How did the sink holes go on the props?
Yep, they are on the old sprue, since they started making the G-variants. Eduard just adds it in every G-box, no matter what you build. The specific sprues (G-10, G-14AS, G-6/AS) are the new ones and they are "defective" so to say.What is annoying is that I have three other propellers on the sprue tree and they are fine
fubar57
General
Last bit of mud added. These holes were deep and the mud sucked into them so hopefully this will do
fubar57
General
Aircraft decals are done. Spinner decal to do. I might do that one underwater as every other decal has given me about a 10 second working time. I'm wondering if its the decal glue
Speaking of propellers, I notice what looks like weathering on the tip (A) and perhaps RLM76 over-spray at the base (2)
fubar57
General
Propeller done. I'll check tomorrow and see if anything shrank and give it a final sanding. Paint will be Tamiya XF-27 Black Green. Also gave the spinner a final coat of Nato Black. Gloss coat tomorrow and attempt the spiral when I get home from PG tomorrow night
Vic Balshaw
Major General
Nicely done George.
IMHO it is not overspraying of the RLM76 but the light trick mainly. In all pics of the kite it can be noticed that the prop and the spinner are clean and there is a lack of a such applying. The two parts look like being dusted by the pollen and the dust from the meadow and its dry grass . Please pay your attention that the effect can be noticed at the blade , let's say , the top one only. In the another pic of her taken from the port side of the kite the effect is less noticed The same effect can be found in the image of the Bf 109G "White 44". And just on the "top blade" only.
and here is the next shot of the White 43. Notice how the sunlight affects the prop blades.
the pic source:
Bf 109 G-10 Mtt Regensburg
Explore this photo album by Marc-André Haldimann on Flickr!
www.flickr.com
