Thanks for the comments guys.
Here's this week progress.
Pic 1
Airfix kit. Flash is negligible for the most part, but this sprue with the prop parts seems to be bad.
Pic 2
Turning the sprue over reveals the back of the props, each one with a sink mark that will need to be fixed.
Pic 3
Painted the ID lights for the bottom of the fuselage.
Pic 4
Sprayed the interior of the wheel bays interior grey green. This is the Eduard call out, and from what I understand that the later marks were painted this colour here, rather than aluminium of the earlier marks.
Pic 5
Wings joined, and a great fit too!
Pic 6
Also joined was the fuselage halves. Before joining, I scraped off all the side wall details, ready for the resin cockpit. Strictly not the right order of things, but should be easier to get the pit lined up later. Fit was great, no problems.
Pic 7
Started on the resin bits with a coat of grey green. Lots of exacting work trimming off the resin plugs to get this far, but starting to look the part.
Pic 8
The panel is photo-etch, again this is part of the Eduard boxing, and looks mighty fine for the efforts of a few dabs of CA.