1/48th Messerspit!

[Wurger]

 

[le_steph40]

Very nice

 

[N4521U]

Out of energy today, but found some saved 3D Mk.V leftovers. Decided to use some of them!
And a bit of removal to detail the backing plate for the prop assembly......

 

[Wurger]

 

[Vic Balshaw]

Nothing wrong with using up a few scarps.

 

[Gnomey]

Nice work so far Bill!

 

[N4521U]

So today I thought and thought.
Came to the conclusion I was making too much work, out of too much work!
So I decided my decision was off the mark. I used the Mk.V I.P. afterall.
Fitted the completed cockpit. The fuselage can slide over the pit attached to the wing top.
Did some aging of the assembly will now button up the fuselage and get all this ready to paint.

 

[Wurger]

 

[Vic Balshaw]

So today I thought and thought.
Came to the conclusion I was making too much work, out of too much work!
So I decided my decision was off the mark. I used the Mk.V I.P. afterall.
Fitted the completed cockpit. The fuselage can slide over the pit attached to the wing top.
Did some aging of the assembly will now button up the fuselage and get all this ready to paint.
View attachment 738325

So you though the thought and decided the decision was that you like to work the work. Nicely put together Bill..........I refer to the pre buttoning of the buttoning up.

 

[fubar57]

Good stuff Bill

 

[Gnomey]

Nicely done so far Bill!

 

[N4521U]

Annnnnnd it's stuck together, lightly "clampt".

 

[fubar57]

Ever so close to the togetherness

 

[SaparotRob]

Annnnnnd it's stuck together, lightly "clampt".
View attachment 738400

Kinky.

 

[Vic Balshaw]

Great stiff. Those Granny clips sure come in handy.

 

[Crimea_River]

Nice that you can fit all that cockpit stuff to the wing and the fuselage over it. Very handy.

 

[Wurger]

 

[Gnomey]

Good work so far Bill!

 

[N4521U]

Sorry for this post, but me getting the glass attached is a big thing for me!

 

[Wurger]