Thank you
Dr. Huge for your visit.
...
The assembly of the first sections, are very easily explained in the instructions, but it requires some juggling to make the pieces are correctly ...
I like to think about how I'm going to achieve it, ... and this thing occurred to me to be able to have an assembly at right angles and different levels that should be parallel.
Everything was checked on both sides of the fuselage by dry fits, to have the correct distances.
A little work, patience and think things through, to avoid any error as much as possible.
Thus it was concluded and completed, this first section ...
Very rudimentary my way of achieving the expected result, but I'm happy when I can help me with utensils that I'm collecting around the house ... hehehe
We can see the difference in the seats, the one on the left is narrower, after filed and sanding to improve the appearance to the real ones.
With an epoxy mass I made the cushions and the backrest of the pilot's seat, details are still missing and I do not know if the seat of the co-pilot will go like this or trimmed ...
The seats are not yet attached to the floor; It will be after detailing and painting the entire cabin, to then place them in their place.
That's all for now... Saludos!!