Consolidated B-24D LIBERATOR; 1/48 Revell

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

It has been an interesting and entertaining process to rebuild and reinforce the piece that will give a small support in the back of the plane.

... let the photos speak!, ... and please do not hesitate to ask what you want.



At first I thought of using the thinness of an acupuncture needle (because the small of the pieces), but I decided to use the same clip to reinforce the end that is attached to the inside ...



... and so it was in the beginning ...



... And I did a dry fit ...



The enlargement of the piece of white styrene, would give better and greater surface to attach that end to the inner part.

Back in a moment with more ...
 
... now I had to calculate the length of that clip in the best way, so that it was minimum what had to be "adjusted" so that the airplane would be perfectly seated, ... and so it occurred to me ...



Placing a small container with weight on the tip, I got the three tires to touch the floor and at the end of the table I could observe the correct distance ... and I just dialed with a pencil and made the cut with a metal scissors.

I liked the result of the finished piece ...



... and again in a dry fit (or dry test, ... I do not know how to say it correctly), I could see that it was very stable and correctly leveled plane ...



I returned to remove the piece and now it is only a matter of painting (I will be based on the reference of the image shared by Wojtek in post # 838)

How many things have come up with details and composures, uff !!, ... worth recapitulating and mentioning the improvements, errors and accidents that have been done here, as suggested by good friend Robert Parker.

Well, it's all for the moment, I'll go to sleep for a while, good night on this side of the world and good morning everyone on the other side.

Saludos
Luis Carlos
 
Darryl, Wojtek, Robert & Geo, thank you as always for your kind comments.

I think this was the last piece rebuilt and modified for this my tenth model under construction.

I added a few more details that improve the real appearance ...



For the painting process, I used these colors.



..with gun metal I made the wear and tear and use ... and finally a wash with oils to dirty the piece.



I feel satisfied and happy with the finish of the tiny piece.




... that seems to you, ... has a resemblance to the one of real size ....??



I share an image of my improvised and very messy mini photo studio.




Well, I have already retouched up some parts of the lower part of the plane, mainly in the area of the front landing gear, the floodgates and the central rail, and ... if there is no more surprise , I will give the final weatherig to the whole Lib and mount all the outer parts.

I will keep you informed and again THANK YOU for your company in the process.

Luis Carlos
 
I entertained myself a little by clearing the possible excess paint from the metal structure of the bubble, for which I used a toothpick with a sharp point and the other flat but square.
In some parts, paint was missing or peeled and I brushed it with a fine-tipped brush.



Later we can see in detail, with the machine guns installed.

Now, for the final wash I used very diluted oils in Sprint solvent (for oil paints) ... I want it to be a very thin layer so as not to darken the Lib.



Is a very light layer that homogenizes the decals and makes subtle the different tones of the panels ...



For the smoke and fire marks of the engines, as well as the gasoline intakes, I used the same technique as in the lower part.



I like that it is very controllable and with the brushes (one with oil and the other dry) I can put or remove the intensity of smoke, and with cotton swabs (q-tips) fine detail and finish.
As you will remember (with the engines on the bottom), engine # 3 is the one I liked to represent that was overheated or even caught fire in flight. And the smoke was so great, that the right rear stabilizer was also struck by the smoke.




Regreso en un momento...
 
Another pair of more complete photos



I will let dry for a couple of days, I will place the small external parts to then apply the matt varnish that fixes all the work done.

Only need to work on all the lights and place the antenna cables ...

Greetings to all
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Similar threads

B-24 Liberator Diorama - 1/48th Scale.
30 31 32
Replies
636
Views
24K
Airframes
Revell 1/48 A-26B Invader– Maggie’s Drawers
2 3
Replies
40
Views
2K
Gnomey
D
1:72 Revell PT-13
Replies
7
Views
466
Lucky13
1/48 EA-18G Growler
Replies
14
Views
659
Donivanp
1/48 Airfix Hawker Hurricane Mk.I
2 3
Replies
48
Views
1K
Crimea_River
Menu
Log in
Register