As I said, I decided to make the cuts, confident in the good quality and structure of the coat hanger ...
... the cutting drill and its work ...
With different files, until reaching the desired distance ...
With sandpaper from 240 to 400 I mainly removed a mark to the center of the whole piece on both sides (external and internal) and then smooth as much as possible. There was a beautiful frosted finish; But the main thing is that you can see better how the piece is ...
... and I started to give a deep sanding with sandpaper from 3200 to 12000. It made me sweat and I just made the front rib ...
I will leave for later (and little by little) to continue advancing in the fine sanding of the whole piece, ... there is time while I continue advancing with my TEE.
Before, I had time to finish perfecting the appearance of these SCARs rockets:
Arrow 1 indicates the last rocket before correcting it and arrow 2 is the adjustment that I had to make with a styrene strip, to make the rail appear (I made the mistake of sanding too much and I did not have space to shape the rail
).
The other rockets were finished (I think it was obvious that it was a manual work, but they are not so bad ...
)
The before and after photos.
Well, it's all for now, to keep working, I hope you like it.
Saludos