Thanks guys
This weeks update as follows:-
Pic 1
I first painted the canopy frame RLM02 so this will show through to the interior.
Pic 2
Before spraying the yellow nose and tail I like to first paint with white, as yellow can be very transparent. It can also take a couple of coats of the yellow to get the right density.
Pic 3
Here's the rudder done in white.
Pic 4
The yellow schnoz done. I haven't as yet attached the engine cover, so it may look a little off in this pic
Pic 5
The rudderl painted yellow RLM04 Gelb which is a Model Masters Paint.
Pic 6
Progress on the spinner. It should be 50/50 white and black with a green tip that matches the "Tatzelwurm" decal that Hasegawa supply. Tamiya green was a good match.
Pic 7
The yellow areas were then masked and the RLM02 was sprayed on the upper wings, elevators and fuselage.
Pic 8
Further masking for the RLM71 on the upper surfaces was done.
Pic 9
I then masked off the upper surfaces of the wings and applied the RLM65 to the lower surfaces.
Pic 10
Underside after spraying the RLM65.
Pic 11
I got a bit more overspray than I intended. I touched up the canopy with RLM71 and then got ready to do the splotching. Hopefully it's looking up to scratch.
Thanks for you comments and feedback is always welcome!
Have a good weekend
Cheers
Peter