**** DONE: 1/48 C-47A Skytrain - Jet/Recon/Transport GB (2 Viewers)

+1 at least you have the photos :D
 
Thanks guys, seats installed and started painting the inside of the fusealage.

003-43_zps427dc405.jpg


004-22_zps2f424993.jpg
 
Nice work again there Jerry. In the last photo, it looks like there is no internal frame detail - rather surprising if there isn't, considering all the other detail in the kit.
 
Agree with all....... and Terry.

Fine job matey.
 
Looking good, Igor. I've logged many hours in the Navy version, the R4D. Have you got a paint scheme in mind ?

Charles

Charles this will be done as 92nd TCS /439th TCG june 1944.
 
Thanks guys, here are the last few bits for the interior and i started putting glass in Terry here is a close up of the interior hope its a little better.

005-20_zps09f9dc42.jpg

007-9_zps411b5f13.jpg

008-4_zps8e115edc.jpg

006-16_zps39fbb732.jpg
 
Ah, I can see it now. A bit on the 'fine' side maybe, and no detail around or below the windows, with the noticeable cross braces. But, once it's closed up, the only area seen will be directly opposite the door.
Looking forward to seeing it all go together.
 
That's looking good man....
 
Looking great.
 
Thanks guys, Bill that clear panel would be nice to try but i would be scared of cutting this one up. Okay glass is all in cockpit sections are glued to the floor and finnally put in place.

001-63_zps1fe80fd2.jpg

002-56_zpsd43d21a3.jpg

003-43_zps4a127ad3.jpg


005-20_zpsd654bdff.jpg


004-22_zpsd4fd7933.jpg
 
what would be cool is the side removable!!!!!!!! Or a panel of the side the length of the plane! Yes????? like a bit of a cutaway.

Radical.
 
Jerry, i think you've done a fine job in the interior..:thumbright:
 

Users who are viewing this thread

Back