**** DONE: 1/48 Messerschmitt Bf 110 G-2 - Me/ Fw Group Build.

Gerry · Jul 23, 2011

Vic Balshaw said:
Gerry that's got to one of the best looking spinner paint rings I've seen in a long time. Well done mate.

Thanks Vic, but see my explanation, above

Crimea_River · Jul 23, 2011

Thnaks for clearing that up Gerry.

Mathematical solution to the spiral? I think not! When I painted the spirals on my HE 219, I used a Tamiya FW 190 spiral decal as a template to make the mask. Worked very well and did not tax my brain.

Airframes · Jul 23, 2011

Definitely a mathematical formula - the angle of the dangle equals the tilt of the glass minus the contents of the bottle divided by cubes of ice times 2.............

Gerry · Jul 23, 2011

Terry, that's my kind of solution, too!

vikingBerserker · Jul 23, 2011

javlin · Jul 23, 2011

Nice work Gerry!!

javlin · Jul 23, 2011

Crimea_River said:
What an exceptional job you did on those spinners Gerry! Well done! Not quite clear how you did it since if you started with the white, I don't see how you got such a sharp line for the red because that edge of the mask would have tended to wrinkle.

As for bleeding, what you can do is seal the mask edge with a bit of paint of the colour that you would bleed into (in your case white), then once dry, paint the new colour. That way any bleeding that does occur will be the same colour as the surface it bleeds into.

Now listen up! Here's the diagram of what I so clearly explained in post 186:

A scale profile of the spinner is used and the centerline is drawn on. Place a ruler on the point where the center of the band meets the edge of ths spinner on the profile such that the ruler just touches the edge of the spinner but does not intersect it. The line that's formed is the tangent which, if you could imagine the thing in 3D now, would form a cone if spun completely around the spinner. The distance R from the band to the apex of the cone is the radius of the mask, shown at right. The length of the mask is the diameter at the band (D) times pi. Tada!8)

Now to be a SArse teach and for no reason than to be just abusive(teachers always were to me) lets go Intergrate the the surface of the spinner from it's widest pt.to the white line under the curve(no reason too but they made us do this) It has been along time Andy since I have done any of that stuff thanks for the memories.

Gerry · Jul 24, 2011

Thanks David and Kevin.

Kevin, my brain is starting to hurt. I think it's back to Terry's formula.

Crimea_River · Jul 24, 2011

With Terry's method, it delays the brain hurt til the next morning.

Vic Balshaw · Jul 24, 2011

Airframes said:
Definitely a mathematical formula - the angle of the dangle equals the tilt of the glass minus the contents of the bottle divided by cubes of ice times 2.............

'Bottoms up' bots...........

Aaron Brooks Wolters · Jul 24, 2011

Excellent work Gerry and the rest of you clowns lay off the sauce willya.

Gerry · Jul 26, 2011

OK, I foreswear all partaking of alcohol 'till this project is completed.

Gerry · Jul 26, 2011

Just a quick update. Most of the last few days have been spent sanding, filling, sanding again, testing - ad infinitum I reckon I've gone as far as I'm capable, without causing more damage than repair, and am reasonably happy with the result. But this is the part of building I dislike most, so I'm finding it very hard to stay motivated.

Missing panel lines have been re-scribed, with the help of Dymo tape. I then masked up for the yellow under-cowlings and rumpfband. As you can see, I didn't stint on the masking tape! When it dries, the masking will be removed and the yellow portions masked so the RLM 76 can be touched up to give some areas a faded look. Then I hope to mask for the upper camouflage.

In tandem, I've started on the drop tanks and underwing mortar attachments - so getting there, slowly but surely. BTW, the yellow rudder is from my old Galland's 109E, and is being sanded and repainted to apply the correct victory bars.

Airframes · Jul 26, 2011

It's getting there Gerry, nice work.

A4K · Jul 26, 2011

Airframes said:
Definitely a mathematical formula - the angle of the dangle equals the tilt of the glass minus the contents of the bottle divided by cubes of ice times 2.............

Terry...

Great work Gerry!....and I hear ya on the 'doing more damage than good' thing - I've gone too far on the 262 wings, may replace one set completely.

Crimea_River · Jul 26, 2011

Looking good Gerry. I hear ya with the sanding and scribing ..shiver...

Erich · Jul 26, 2011

Gerry

I'm confused now what G-2 from what unit are you building ? if from ZG 76 during Reich defense the under engine nacelles are RLM 76 not yellow

woody · Jul 26, 2011

Gerry the spinner's really look nice as doe'sthe whole build.

Vic Balshaw · Jul 27, 2011

Progressing nicely Gerry, I like your masking routine I always find it a bit of an arduous task and I'm hoping Erich's not thrown a spanner in the works over the nacelles colour

Wayne Little · Jul 27, 2011

Doin' a great job Gerry....

**** DONE: 1/48 Messerschmitt Bf 110 G-2 - Me/ Fw Group Build.

Staff Sergeant

Marshal

Benevolens Magister

Staff Sergeant

Lieutenant General

2nd Lieutenant

2nd Lieutenant

Staff Sergeant

Marshal

Major General

Brigadier General

Staff Sergeant

Staff Sergeant

Attachments

Benevolens Magister

Brigadier General

Marshal

the old Sage

Master Sergeant

Major General

Moderator

Users who are viewing this thread

Similar threads