**** DONE: 1/48 P-38J - Your Favorite Aircraft of All Time GB

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

I have been working alot lately and out of town a couple of days also so work has been slow.The belts are the ones you weave yourself from Waldron and I used tape for the harness.I added a box on the right side of the radio hole punched it and even though the pictures do not show it well there is a Waldron dial in there.I then added another small box on the L/side with a wire running to it also.The box on the R/side of the pit I cut down some and added the red switches out of wire the kit supplied nothing in that manner.Now the white 2X4 deally behind the pilot seat is part of a brace setup I noticed from a very good builder applied over at LSP to a 1/32 P-38.mine will not be quite as sophisicated as his but will add some more depth and detail in this area.It should start picking up after the pit area is finished.;) Cheers
 

Attachments

  • GB38 13 007_edited.jpg
    GB38 13 007_edited.jpg
    20.4 KB · Views: 92
  • GB38 13 008_edited.jpg
    GB38 13 008_edited.jpg
    21.7 KB · Views: 96
  • GB38 13 009_edited.jpg
    GB38 13 009_edited.jpg
    21.7 KB · Views: 93
  • GB38 13 010_edited.jpg
    GB38 13 010_edited.jpg
    41.6 KB · Views: 92
Thank you Guys.I have the fuse buttoned up and the seat support in play.I have also started on one of the wheel wells tonight.Cheers
 
Some Pics....
 

Attachments

  • GB38 13 011_edited.jpg
    GB38 13 011_edited.jpg
    39.5 KB · Views: 95
  • GB38 13 012_edited.jpg
    GB38 13 012_edited.jpg
    38 KB · Views: 93
  • GB38 13 013_edited.jpg
    GB38 13 013_edited.jpg
    36.9 KB · Views: 97

Users who are viewing this thread

Back