I have been working alot lately and out of town a couple of days also so work has been slow.The belts are the ones you weave yourself from Waldron and I used tape for the harness.I added a box on the right side of the radio hole punched it and even though the pictures do not show it well there is a Waldron dial in there.I then added another small box on the L/side with a wire running to it also.The box on the R/side of the pit I cut down some and added the red switches out of wire the kit supplied nothing in that manner.Now the white 2X4 deally behind the pilot seat is part of a brace setup I noticed from a very good builder applied over at LSP to a 1/32 P-38.mine will not be quite as sophisicated as his but will add some more depth and detail in this area.It should start picking up after the pit area is finished. Cheers