My first entry for the Favorite Aircraft of All Time Group Build is a P-47D Razorback. I can't quite decide if I'll do it as Capt. Walter C. Beckham's "Little Demon" of the 351st FS/353rd FG, or Capt Gerald Johnson's "In The Mood" of the 61st FS/56th FG. I have decal sheets for both and since the paint schemes are similar I'll decide later in the build and keep both in the title until the decision is made.
The Tamiya kit is to put it flatly, the best kit I have ever pieced together. The detail is wonderful and fit of the parts incredible. I started test fitting it and soon had the entire cockpit and airframe together with no tape(except a little piece to hold on the rudder pedals). I foresee very little if any filler needed. The last pictures are the test fitting of the cockpit showing the wonderful detail.. (I forgot to take one when I had the whole thing together). I plan to start in on the cockpit right away.
It's a very good kit, that's for sure. You should turn this one into something really special, no matter which scheme you choose. My vote's for Johnson's bird though!
Picture 1 A nice profile of the aircraft Picture 2 Capt. Walter C. Beckham in front of "Little Demon" Picture 3 A period picture Picture 4 What I believe is a period picture Pictures 5-7 Pictures of a P-47G finished as "Little Demon" Picture 8 That same P-47G at Duxford being taken apart prior to being refinished as "Snafu". I had this same picture as the wallpaper of my computer for well over a year so I'm somewhat leaning toward this choice. Picture 9 The decals
Here are some pictures of "In The Mood"
Pictures 1-2 A couple of nice profiles of the aircraft
Picture 3 Capt. Gerald Johnson and the aircraft
Pictures 4-6 Some color pictures
Pictures 7-8 The decals
The test fitting of the cockpit showed me that quite a bit would be visible forward of the control panel so the forward bulkhead will be seen. In the early P-47s this bulkhead was corrugated vertically similar to the floor (later models were corrugated horizontally. Tamiya didn't put any of this detail on so I added it using thin slivers of tape which was painted and weathered as seen in the first 2 pics.
The back of the panel will of course be visible so I added some cables made from thin copper wire (picture 3)
The rest of the pictures are of the detail painting of the cockpit parts.