Crimea_River
Marshal
Good work Glenn. Glad to see some progress on it.
**** DONE: GB-53 1/48 Morane-Saulnier MS 410 - Eastern Front
- Thread starter T Bolt
- Start date
Vic Balshaw
Major General
Doing good Glenn, I love the scratch seat harness and 'yes', a very complex paint scheme. 
Good work so far Glenn!
keep at it Glenn looking good.
- Thread starter
- #45
T Bolt
Colonel
My wife and daughter who between them seem to eat up most of my spare time are in Florida for a week so I'm hoping I can get a lot done on this one this week.
Progress over the last couple of days.
All the filling and sanding completed and the canopy on, masked, and ready for paint
White painted on all areas that will be yellow plus the white "1" on the tail
The yellow has been sprayed on
The yellow and white '1' masked, the horizontal tail surfaces and radiator installed, and the blue-gray underside sprayed on. (the masking on the yellow wingtips already pulled off)
Progress over the last couple of days.
All the filling and sanding completed and the canopy on, masked, and ready for paint
White painted on all areas that will be yellow plus the white "1" on the tail
The yellow has been sprayed on
The yellow and white '1' masked, the horizontal tail surfaces and radiator installed, and the blue-gray underside sprayed on. (the masking on the yellow wingtips already pulled off)
Crimea_River
Marshal
Looking good Glenn. Nice to have some me-time.
Vic Balshaw
Major General
Looks good Glenn, up to your usual high standard.
Like it Glenn.
- Thread starter
- #50
T Bolt
Colonel
Masked off the under side blue-gray last night and sprayed on the dark green from a very old bottle of enamel Model Master. The hobby shop who's price tag was on it went out of business well over 10 years ago, probably closer to 20
fubar57
General
Looking good Glenn. I still have the big bottles of Tamiya that I got in the 90s
Nice work so far Glenn!
Vic Balshaw
Major General
Looking good Glenn.
- Thread starter
- #55
T Bolt
Colonel
I've had this one for at least 40 years, note he price on the cap. Haven't opened it in a while, but it still looks like it could be good
- Thread starter
- #57
T Bolt
Colonel
Last nights session.
Masking for the brown paint using paper held away from the surface by blue tac
The brown sprayed on
And what it looked like after taking off the masking. I got a but carried away with peeling off the masking and should have left the yellow covered for the winter white camo so I'll be putting that back on.
Masking for the brown paint using paper held away from the surface by blue tac
The brown sprayed on
And what it looked like after taking off the masking. I got a but carried away with peeling off the masking and should have left the yellow covered for the winter white camo so I'll be putting that back on.
fubar57
General
Master masker 
- Thread starter
- #60
T Bolt
Colonel
Over 2 hours of masking, ten minutes of spraying and a twenty minutes to pull the masks off. If you look closely you can see the horizontal tail surfaces came off with the masks. Very weak attachment points and very sticky blue tac.
This has been one of the most challenging masking jobs I've ever done, but that's all done now and tomorrow I'll start destressing the white winter camo.
This has been one of the most challenging masking jobs I've ever done, but that's all done now and tomorrow I'll start destressing the white winter camo.
