Last of the colour spraying is done. Not wanting to risk a respray, I masked the entire model. Masking the canopy was a right pain in the keester. I sprayed it off the model and used the spare canopy as a mask
Added panel liner to the front of the aircraft as the wing area seems to be the most active area. I only have dark brown which I feel would be too stark and two greys, too light so I mixed brown with light grey. I also used it too try make scuff marks but while it shows up in real life, not so much in the photos
All done for the week and the end of three week vacation. Have a good week gentlemen
I just pictured an angry "Dangerous" Dan McGrew kicking down the door of his cabin (frightening the Kodiak bears) trudging into the 12 foot drifts muttering "no ******* paint. ****, just go to work."
Thanks guys. Crappy tour. Spent most of the time capping roads with only one wiggle wagon running which meant a load every 15-20 minutes. Anyhoo....formation and ID lights. I was unaware of the blue light on top of each wing. Under the wing, I didn't have any clear orange so I mixed clear red and yeller