Fw190A6 Sturmjager of Sturmstaffel1

[Wurger]

THX Jason.

 

[Wurger]

Today I made the second half of the fuselage longer and much more fitted to drawings.

 

[Njaco]

Amazing!

Wurger, now that you've lengthened it, will you have a problem with the canopy?

 

[Wurger]

THX Njaco. Rather no.The cockpit conopy from the kit can be too short now but it is no problem.

Here a few pics of working on the rear part.

 

[ccheese]

Great work, Wojtek. Can't wait to see how you smooth out the inserts.

Charles

 

[Wurger]

THX My Friend.I'll show it later.But now here some pics of lengthened left half of the fuselage.

 

[109ROAMING]

Superb mate! 8)

 

[rochie]

excellent Wojtec as always

 

[Heinz]

Wojtek great stuff my friend

 

[Airframes]

Amazing Herr Doktor! Wonderful work Wojtek.

 

[Wurger]

THX Gents.
Here the initial attempt to make these extentions smooth.The tool is well known I think.

 

[A4K]

Fantastic work Wojtek!

 

[Wurger]

THX Evan.

 

[Wayne Little]

The crazy man is at it again!!....

Doing great Wojtek!

 

[Airframes]

Agree with all, it's fascinating to watch the progress!

 

[muller]

Nice modifying Wojtek, I don't know how you have the patience!

 

[ccheese]

Wonderful, Wojtek. I agree with Muller... patience, patience, patience !

Charles

 

[Wurger]

THX guys.Most appreciated.

 

[Heinz]

Great work Wojtek!

 

[Wurger]

THX mates.

The next step is the fin correction.As it was mentioned by a few guys here it is of incorrect width.I can agree with it but to a certain extent only.
Comparing to the Kagero drawinds it appeares too short and it has to be made higher.Its width is incorrect at the low area only but it is of less then 1mm.I was thinking about correction to that quite long because the mistake is quite small, but a surgery is a surgery and I decided to correct it by changing to the fin leading adge.In the second pic you can see what I mean.The rotate point is a point where the incorrect leading edge has to be rotate right to get a proper angle.
I started the correction with cutting off halves of the rudder.In the last pic you can notice that the rudder is of a quite correct shape but it is too narrow.