The first coat of PC10 is on, not without problems - bl**dy Humbrol!
The Satin Dark Green didn't want to play, with the pigment refusing to mix in properly with the carrier, despite stirring for over 15 minutes! Not the first time this has happened, so I made the best of it and mixed it with matt black, and Khaki, to produce an approximation of the brown-tinged dark green known as PC10.
Once it has dried fully, which will probably take at least 24 hours, I'll give it another, thin coat, followed by a clear coat once the paint is fully hardened.
The pics show the upper and lower surfaces, and the upper wing, with the 'wrap-around' of the green done freehand.
A little re-touching here and there will be followed by some very light shading, to represent the frames of the lower fuselage.
The inter-plane struts have also had the first stage of painting completed, and have yet to have the black end pieces added (after fitting the cross-bracing wires), followed by a semi-gloss clear coat.
Thanks once again for your continued interest, and I'll post another up-date once the darned paint has dried fully !