Hi,
as I mentioned I wanted to take some photos on this "in-progress" model but, as the sun didn't showed-up, I had to do that under a lamp.
As you will see, one consequence is that the interior green, I used Lifecolor as their shade seems to me to be quite correct, is almost undistinguishable from the grey plastic.
Here we are:
Landing gear bays, almost ready to be installed in wings.
Left and right cockpit panels:
Cockpit floor with the home made control stick: the kit one IMHO was too tick an wrong in shape.
Of course the control stick waits for painting and the whole cockpit requires some weathering.
Then we have fuselage halves:
I added that plasti-card shim following the suggestion of an other modeller, because I wanted the front section to be round, not almost oval.
Last but not least, I started separating all movable surfaces.
More to follow.
Alberto