Trumpeter 1/32 US Navy SBD-5/A-24B "Dauntless"

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Vaughan

Senior Airman
629
12
Oct 1, 2012
Norwich
Hi All
Here's my next build I thought I would try and keep the momentum going so I'm not going to take a break between builds. This of course might not work but I'll give it a go.
Here are the spru shoots not much to say here but they are up to Trumpeter's usual high standard no flash and some fantastic surface detail. As per usual Trumpeter give you a little goody box with clear parts( which are incredibly thin and very much to scale some thing other manufactures should take on board) , tyres(two types) PE parts which even include gun sights and air brakes.
Decals are in good registration with four options and finally the colour chart four options again even an army version in olive drab. I might well opt for this version as this will be different from the norm.
Not sure when this one will kick off, hopefully soon.
 

Attachments

  • 141610_3131.jpg
    239.1 KB · Views: 280
  • 141610_3132.jpg
    237.3 KB · Views: 251
  • 141610_3133.jpg
    187.1 KB · Views: 292
  • 141610_3136.jpg
    287 KB · Views: 321
  • 141610_3137.jpg
    266.9 KB · Views: 267
  • 141610_3138.jpg
    257 KB · Views: 247
  • 141610_3139.jpg
    218.4 KB · Views: 274
  • 141610_3140.jpg
    341.9 KB · Views: 256
  • 141610_3141.jpg
    168.9 KB · Views: 281
  • 141610_3142.jpg
    162.2 KB · Views: 305
  • 141610_3143.jpg
    146.5 KB · Views: 513
  • 141610_3144.jpg
    143.6 KB · Views: 589
  • 141610_3145.jpg
    323 KB · Views: 313
  • 141610_3129.jpg
    246.6 KB · Views: 267
Good stuff Vaughan. Looking forward to seeing you tackle it. Wondering about those clear engine cowls though....
Yeah I don't know what the fascination is that Trumpeter has with clear cowlings, although HobbyBoss do the same thing I had the same issue with the IL-2 Sturmovik I built a while back.
 
Well I've made a tentative start on the radial engine and ancillary parts. All's looking good Trumpeter doesn't disappoint with the amount of detail it's a shame that most of it will be covered up with the engine cowlings. I did a quick dry fit of the fuselage and wings to see how big she will be when finished here's the a comparison with the 109 I have just completed. The wings halves will have to be trimmed and sanded where they were connected to the sprus so they fit together properly this seems to be a common thing with Trumpeter.
 

Attachments

  • 142010_3155.jpg
    272.8 KB · Views: 218
  • 142010_3159.jpg
    395.2 KB · Views: 218
  • 142110_3168.jpg
    309.9 KB · Views: 223
  • 142210_3161.jpg
    602.5 KB · Views: 243
  • 142210_3163.jpg
    426.7 KB · Views: 219
  • 142210_3164.jpg
    489.6 KB · Views: 232
Well I've finally made some progress with the radial engine. It's all but complete with just a few tweaks to do.The only thing that I have added is the ignition leads using lead wire still to add the secondary leads to the other side of the cylinder heads. The last shots are with my pet hate the transparent cowlings with a dry fit at the moment.
I've made one screaming mistake I've inadvertently removed what I thought was a spru attachment on the clear cowling and turns out to be the fixing point of the swing bomb cradle. But to be fare on myself the other side was missing otherwise I might of thought twice. We live and learn, so there will be a bit of scratch building coming up.
 

Attachments

  • 141511_3436.jpg
    372.3 KB · Views: 219
  • 141511_3437.jpg
    228.9 KB · Views: 232
  • 141611_3417.jpg
    278.3 KB · Views: 215
  • 141611_3444.jpg
    257 KB · Views: 220
  • 141611_3449.jpg
    281.6 KB · Views: 247
  • 141611_3466.jpg
    220.6 KB · Views: 219
  • 141611_3468.jpg
    232.5 KB · Views: 232
Here's some more shots with both cowling on attached to the fuselage. This really shows how ridiculous it would look if left transparent. And of course a photo of the part that's not there anymore.
 

Attachments

  • 141611_3469.jpg
    266.2 KB · Views: 227
  • 141611_3471.jpg
    274.2 KB · Views: 235
  • 141611_3472.jpg
    212.9 KB · Views: 224
  • 141611_3473.jpg
    203.6 KB · Views: 513
  • 141611_3474.jpg
    292.3 KB · Views: 255
  • 141611_3476.jpg
    206.1 KB · Views: 258
  • 141611_3480arrow.jpg
    168.9 KB · Views: 245

Users who are viewing this thread