1/32 Tamiya Merlin's Magic P-51D Reno dio

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Yep you're all right on this one. Uphill about 5 degrees I recon. Thinking someone forgot to put a note on the instructions to remove the pins.

But alas, I will have to put this one away till I get the pictures from Jim in July.

I have to get some airbrush cleaner for my Alclad silver so I can experiment with it. I'll paint the 48th scale plane first with it, then this one when I get to that stage.

On to my HH-60H for GB#14!
 
Well now, the trauma of GB#44 is over and I'm going back to a leisurely pace.
Back on to Merlin's Magic again.
Had fits with hole drilling on the distributer cap.
Had a rethink and used a rivet template, poked some holes with a pin and used them to space the wire holes.
Worked a treat......
Then I got the Dremel out and hogged out the belly of the engine!!!!!!! Arrrrr....
Next trick was making the plug end of the leads?
So drilled a shallow hole in the end of .83mm styrene rod.
Cut that to 1/4". Used needle file to scallop the end of 1.15mm rod, a touch of thin cement.
When set cut the 1.15 rod to 3/16" long and done.
A bubble of thick CA in the hole, stuck in the red .38mm wire and Bob's yer uncle.
Easy peasy
.
 
So back to M.M.
Wiring;
To further what I've shown above, those are the Outboard plug ends.
I discovered I had to make Straight plug caps for the Inboard plugs.
Discovered is the magic word.
The wire I used is exorbitant in price, didn't realize I had paid so much!!!!!!
So I asked the IPMS members, the car guys, and this is what one suggested.
This roll, same price as 1 bloody meter of Branded!!!!!!
I show the roll with the first batch of Outboard plug wire caps.


These are the INboard ends caps.
I will suggest, if one wants to try all this I would drill the holes for the little tips (plugs)
Before attaching the valve cover And the intake manifold. So much easier, I have found.


Spaghetti............


It ain't easy.
Lesson learned!!!!!!!
Attach the wire in the Mag......... BEFORE attaching plug ends.
Attach plug ends oriented as desired Then trim length and insert into plug end piece.
It's called experience. Defined as having screwed up more than anyone else!!!!
On I go!
The wire is attached to the plug ends and Mag by a dot of "THICK" CA super glue.
 
Thanks guys.
This one is another special one,

Some progress on black replacement engine,
wiring underway on red!
A bit of a mockup.

All kinds of things need doing.
Gun locations have been sheeted over, ammo comp as well.
Wing tip fences need to be fabbed.
More piping at engine, cooling etc.
 
Thanks, you're quick to look in!
So I've done one fence, starboard wing.
This is what it ends up to be.... first photo.
Shaped the leading corner....2nd
cut a card to duplicate port wing......3rd
Now the realllly tuff part...... how to get it All to be a mirror shape!.....4th
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Similar threads

1/72 mustang P-51D
Replies
9
Views
563
Gnomey
My next project. Tamiya's 1/32 F4U-1D Corsair.
Replies
5
Views
535
javlin
1/32 scale de Havilland Mosquito FB Mk.VI
4 5 6
Replies
104
Views
4K
rochie
Tamiya 1/48 P-47D-22, s.n. 42-26044, HV-Z ‘’Silver Lady’
2
Replies
33
Views
2K
zaxos345
1/32 Tamiya P-51D-5 "Little Eva III"
4 5 6
Replies
102
Views
7K
Gnomey
Menu
Log in
Register