Pic 1 - Engine and wheels attached
Pic 2 - I always need an extra set of hands when I'm doing rigging, and this set-up helps a lot.
Pic 3 - Looks like a bird's nest, but this shows the wires attached to the upper wing. The holes in the upper are only drilled half way in. The lower are all the way through so they can be pulled tight and glued from the bottom. I'll have a pic when I get to that part. Also, in the background you can see the two bottle caps, one with CA glue in it, one with CA accelerator. I drop a bit of glue in the hole with a toothpick. Then i dip the line in the accelerator and into the hole.
Pic 4 - Rigged tail