**** DONE: 1/48 Bf109F-4 J.Steinhoff - Your Favorite Aircraft of All Time GB (1 Viewer)

She turned out great :D love the engine :)
 
Beautiful Andy!

To get the flat spot right on the wheels I put a full sheet of sand paper on a flat surface and set the model on it and gently (very gently) move it back and forth with a little downward pressure flattening the wheels.
 
Last edited:
She looks great Wayne......I mean Andy! :)
 
Thanks Wojtek, and you're welcome.
 
Cheers Wayne. Did a bit of silvering repair last night and found out solv-a-set melts dullcoat if left on too long. Nothing major and easily fixed.
 
Cheeers Karl. No work on this one tonight as I was out on the links.
 
What, you mean it doesn't rain all the time over there? Incredible! It's so wet here, that a local company have published a new magazine, one of those 'In twenty weekly parts' things, Part One provides the keel for an Ark, with subsequent editions providing the parts to build the complete vessel ....
 
I like link sausage.
 
Cheers Wayne. Did a bit of silvering repair last night and found out solv-a-set melts dullcoat if left on too long. Nothing major and easily fixed.

Gotta watch out for any of them left on too long Andy...i usually apply with a fine brush and soak it up quickly with a tissue to reduce the problem, as you say easily fixed though...
 
My technique's been to dab some on the silvered part, then poke the area with the end of a sharp x-acto blade til the silver disappears. Working well now and should hopefully get these areas sorted tonight. Pics then.
 
Onwards....

I've now finished fixing the silvering and did a bit of gloss coating over these areas before applying some dullcoat again to finish. In the meantime, I did a bit of work on some fiddley bits.

Pitot tube made of Evergreen rod and stretched sprue:

120511 Pitot.jpg


The finished cowl with all fasteners opened and areas blackened with pastel, ready to be glued in the open position:

120511 Cowl.jpg


Before attaching the cowl, I wanted to replicate the catches for the cowl fasteners seen within the circles in the below pic:

2890396220036857008S600x600Q85.jpg


I made these of rod and folded paper....

120511 Fasteners 1.jpg


..then painted them 02 and CA-glued them into the engine bay.

120511 Fasteners.jpg


Getting close now.
 

Users who are viewing this thread

Back