Thanks for the offer Paul but I'd need 4. Because I would have to scratch build these, I've decided to forget about them and just go with the kit-supplied bombs. Rockets on the other hand were swiped from my Tamiya Corsair and the mods are shown below.
The Tamiya Mk 5 rocket mounts came in pairs on a thick plastic base. Looking at photos of the Avenger installation, I decided to cut the posts off the Tamiya bases and glue them to plastic card strips that I cut to represent the Avenger installations.
These were then stuck to the sticky side of some masking tape to spray the white.
The Tamiya rockets have been assembled and the motors painted here with a light metallic gray colour. The warheads will be Olive Drab and the tips will be silver. The ejector pin marks that you can see here won't be visible as they will be facing up toward the wing surface.
I also worked on the landing light which the kit did not replicate very well. To do this, I used a trick explained by Wojtek. Not all the steps are shown here but I started with a piece of sprue and drilled a center hole in the end. A larger drill bit was then used to dish the end and a piece of foil tape was stick to the dish. Then, a bulb was made using a piece of clear sprue stretched and curled back in a candle flame and the end was then cut and glued into the dish hole.
The finished light was then carefully cut from the sprue and glued to the opening. Evident in this picture was the need to attend to a pi$$ poor leading edge finish which I frankly forgot to fix before I painted the white.
I glued on the lens and sanded the area to smooth everything out and while I was at it, I fixed the entire leading edge and repainted the white and gray.
And that's how it looks today.