**** DONE: Focke Wulf Ta152H-1 Stab/JG301 - Your Favorite Aircraft of All Time GB

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Wayne very clean

does it appear to you that the # 9 seems to be too light in colour overall as a decal transfer or maybe just the brightness of the pic ?
 
Thanks Guys, good to see you popping in Erich! The Green markings are slightly darker, but do show up lighter from the brightness.

Further decals applied Under wing crosses and a couple more stencil markings....but most important the correct style of Werk Nummer!! both the Eagle Editions and Zoukei Mura numbers are not correct.
I scanned and supplied the most accurate 1/48 Trimaster W.Nr. to Dan (Zaggy) and he graciously upscaled it to 1/32 and printed off new decals for me, arrived last night and i put them on today.

.....so to date I am the only 1/32 Ta152H-1 builder with correctly styled 150168 W.Nr. decals applied to Green 9!!

see the differing styles of W.Nr. below, Eagle Editions first, Trimaster second and Zoukei Mura third.
 

Attachments

  • 1A_EE-150168.jpg
    14.3 KB · Views: 86
  • 1AA_Trimaster Decal 150168.jpg
    14.3 KB · Views: 86
  • 1AAA_ZM_150168.jpg
    15.5 KB · Views: 89
  • 119_Lower Surface decals_0763.jpg
    50.8 KB · Views: 99
  • 120_W.Nr. 150168 Decal_0769.jpg
    56.7 KB · Views: 123
No flat coat but did gloss some extra bits...also took an overall shot of all the glossed stuff.

Decided to add the alloy codes in the wheel wells, again courtesy of Dan/Zaggy these were cut in 3 sections of strips and applied so they fitted to the contour of the wheel well, pressed them into the wells with a cotton bud to sit them right and soak up the small amount of water...went on with out a hitch and settled in nicely!! Thanks DAN !
 

Attachments

  • 121_Alloy Codes_0783.jpg
    58.7 KB · Views: 101
  • 122_Everything Glossed_0621.jpg
    114 KB · Views: 92

Users who are viewing this thread