**** DONE: GB-46 1/48 C-2A Greyhound - WW2 Eastern Front / Twin Engine A/C, Transports and Gliders

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Thank you all for your inputs. Update, I've been working as can, it was too hot last week to work up here with temps at 103F ambient and feels like at 115F so I didn't get much done. but I've been working the paint and getting the landing gear positioned.

20200712_194109.jpg
20200712_194134.jpg
20200713_121229.jpg
20200713_121242.jpg
20200713_121248.jpg
20200715_193659.jpg
1595202053382.jpg
1595202053476.jpg
1595202053512.jpg
 
Well now here's the update. Welcome me to the wonderful world os line accenting!

Navy birds can really be, err, well let's just say look like they may need some upkeep versus their USAF opposites. That's not saying I haven't seen an Air Force jet that didn't look like it could use a bath, just no that many. Any way I stated experimenting with the Tamiya panel line accent paints. I stated with "Gray" and decided it was not dark enough, I went to "Dark Gray" and found my mate. I've also used black, let's see what you guys think.

I thought the way Kinetic did the main wheels was kinda cook. the hub is keyed to the inside of the tire.
20200720_122305.jpg
20200720_122623.jpg

The nose wheels
20200720_123631.jpg

Temporary install of the props
20200720_143301.jpg

First try with Gray
20200720_201650.jpg

Now working with dark gray
20200720_202729.jpg
20200720_202732.jpg

Landing gear done up with the Tamiya Black
20200720_223614.jpg
20200720_223618.jpg
20200720_223621.jpg
20200720_223629.jpg
20200720_223635.jpg

Shame I got ahead of myself and did not install the decals yet, I like where this is going
20200721_094717.jpg
20200721_094722.jpg

Wing fold panels done in black as well
20200721_094739.jpg
20200721_202758.jpg
20200722_000226.jpg
20200722_000243.jpg

Temp install of the wings.
20200722_071214.jpg
20200722_071233.jpg
 
Figured I'd use maybe three or four strands of lead wire and twist them together at the top and break it out at the scissor switch. I don't figure to do a full recreation as I can't figure it out, just for looks
 
Yeah I'd of deleted that picture and pretended i never saw it !

Looks great what youve done with the panel wash
I like the way you think!

So I was having way too much fun with the panel line thing to pay attention to the fact that I needed to put some or like all the decals down before I got to it. So here we goooooooo!

20200723_133742_copy_800x600.jpg
20200723_133727_copy_800x600.jpg
20200723_133730_copy_800x600.jpg
 
While that's not all. Some of those were fairly large. I'm still working the sun flashes on the tail. The set of decals I bought had a thinner set but it cracked when it hit the water. Good news, the kit decals are a bit thick but easier to work with. I did find that I could take the new decals and soak them with Micro Set just brushing it on them and they would come right up. So I getting it done.
 

Users who are viewing this thread

Back