To be able to start applying the color RLM66 Schwarzgrau inside the cockpit, I had to have all the pieces that make it up ready, so I continued with the last touches to the spaghetti, to be able to define the correct position of the noodles.
The union of the frontal panel to the arm of the console, has a very small space of union, so after spending the night with the Tamiya ETC, I reinforced the union with a little cyanoacrylate.
The manipulation of the piece had to be very careful when arranging the wires in a suitable position, ... and to avoid the risk that that union could be detached or broken.

A first dry fit with the floor of the cabin, the fuselage and the rear wall, allowed me to check that the spaces were the right ones to place the console ...

With tape Tamiya I attached the console to the wall in its corresponding place.
Leaving the branch of the small IP board, it helped me enough to be able to manipulate the piece without risk of bending the wires and not get in my fingers in such a small piece!
With some difficulty to have no accident, finally I could assemble the pieces in a last dry fit, before returning to separate the pieces and wait for their turn of paint.



This is part of my workbench, now I can separate and keep the pieces of the cockpit in a safe place until the moment to start painting.
I hope you like it too.
Now I can dedicate myself to work inside the bomb bay. It must be built in its entirety, because it is a dead space (empty) in the kit.
I have thought to modify the doors of the walls (front and rear) of the bomb bay, to make them in position that the front ones are "practically open" and of the back wall, at least one is open. Each wall has two sliding doors, so it will be entertaining to make those modifications as well.
As I am also going to open the holes for the windows that will include the BB, these and the open doors, will give "more interior light" for the future bomb racks!
But that will be from tomorrow because today I will take my beautiful wife to dinner outside.
Hasta pronto y happy modeling to all.