Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
I do plan on rapping the tip of the barrel in florescent orange tape. Got to be PC you know!Holyshit, hope you don't have an unexpected visit from the local law enforcement. Might want to put a PC correct orange paint/cap over the end. Some dipshit will certainly report you as "carrying around an assault weapon".
All ready thought about thatCool 8)
Once you make this you can make 8 50's for the Thunderbolt
Mike
Great stuff Glenn !
i made a couple of full-size mock-up 30 cals a few years ago, for vehicle mounting. the barrel jackets were made from plastic waste pipe, which was dead easy to drill, and exactly the right diameter. The receivers were plastic cable trunking, over timber, with odds and ends for the fittings, bolt etc.
Problem was, they looked so good mounted on the Jeep they were made for, that it got stopped at every turn by police cars !!
I also made some GPMGs for a S.A.S. Land Rover 'Pinkie', which used actual pistol grips and flash suppressors I managed to obtain, and had belts of de-activated 7.62 mm ammo dangling from them. Those ones really caused problems !!