**** DONE: 1/72 CH-46 Sea Knight Home Country Modern Aircraft/Spitfire Marks GB

[Vic Balshaw]

You got them windows looking nice and shiny.

 

[Airframes]

Looks OK to me too.

 

[Crimea_River]

 

[Gnomey]

Coming along nicely!

 

[destrozas]

thnaks fellas

then go with the changes:

the outputs of the pipes, are removed and placed round the trapezoidal bearing the model is placed side shields for optional equipment, are placed and the union entredas cardand walking the roof, it's finally put the plastic jump straight to eliminate having and wide enough to give the clear. separation was nearly 2mm of each other.

 

[Wayne Little]

 

[Catch22]

Cool.

 

[Vic Balshaw]

That is a bit of technical clamping.

 

[destrozas]

as the decals arrive to continue the aircraft before starting another new project I decided to finish this.

It has cost me a lot time adjusting well all over the whole panel was more accomplished and I had to redo all done and ride see the front transparent is very short but good all solvable, later what you will see.

under the black is painted gray inside to seal the black is the color

Here you can see the finished board and placed

Here you see the hole transparent, little one, little one.

I still have photos to upload, I hope to upload tomorrow

 

[Wurger]

Nice.

 

[T Bolt]

 

[Gnomey]

Good work so far!

 

[destrozas]

I close with kristal klear hole

when dry paint here I put pictures and painted

 

[T Bolt]

Looking good Sergio

 

[fubar57]

Yessir, nice paint job.

Geo

 

[Wurger]

 

[Gnomey]

Lovely work so far!

 

[vikingBerserker]

Wow, I really like that. Nicely done!

 

[destrozas]

thanks fellas!!!!.

I put what little I have.

finish painting the pege tailgate into position, the rotors in their present position, they are not glued are only subject with a little blue-track,

seen here I will say that the gate is very close but not so the helicopter will not go straight but I'm working on part perform a Wasp Cover and place of sigueinte way:

now I hope I get the sheet vinyl to cover

 

[Vic Balshaw]

Even though you only have time to........shall we say 'nibble at the edges from time to time', its coming along nicely Sergio