You guys are too kind...........
I been doing some little stuff, and not so little.
I cut the tabs off the tail feathers. It's so difficult to get both surfaces Flat with the tab in place. So........... cut the bl00dy thing off and get a flat file on it so the surfaces mate flat. The next shot is the elevators jigged up flat and true on my 18mm thick plastic angle blocks, (I cut them at work). Put a piece of PVC rod under the tips, cuz they're tapered, and would point Down if they were flat on the blocks. I'll have to let them dry in this position cuz without the tabs, it's just two flat surfaces together.
I made the port and starboard clearance lights, out of tooth brush handles. Filed bits to 0.6mm rounds. I'll glue them in place after painting, I said I don't like masking. Still trying to figure out how I can fit the engine cowl on in one piece over the engine. Mainly because it's orange, the fuselage is blue. I hate masking!