***** DONE: GB-38 1/48 IAR-80 – Axis A/C
- Thread starter Donivanp
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
Some really good info..!
- Thread starter
- #43
Donivanp
Captain
OK just so I'm not lost here goes. I've not found much (nothing at all) on cockpit photos so I'm winging it. Here's the progress!
fubar57
General
Nice. Little known aircraft are hard to find references for so if no one can find info you pretty much have free range though I would shy away from pink
ovichelu
Airman
On this topic IAR80-81 Walkaround at posts 7,8,9,10 you've got photos. Take a good look at the whole topic . This is an walk around with lots of detail photos. Cheers!
- Thread starter
- #47
N4521U
Colonel
It just looks so long with the pilot so far back.
Thanks for the comparison.
Thanks for the comparison.
- Thread starter
- #50
Donivanp
Captain
OK so I worked on the seat, think I need to rehang the shoulder restraints.
ovichelu
Airman
You putthe fire extinguisher on the wrong side. It was supposed to be on the starboard side.
Here are a couple of photos to help you.
Last edited by a moderator:
- Thread starter
- #54
Donivanp
Captain
Thanks, I'll fix it, just following the kit instructions, I think.
Looks good so far!
Good stuff.
parsifal
Colonel
like the detailing of the inner sidewalls.
ovichelu
Airman
If you haven't finished yet the pilot seat , and you have patience I'll post some scans . You can improve it , and must be careful at the headrest. It differ from one variant to the other and also from time period. Some of the older variants were updated to the newer and improved variant.
Unfortunately it seems that my job is throttling to full speed and at the moment I lack the needed time for scanning. Maybe if someone has the book Vanator Romanian Hunter can post scans.
Keep going, you're doing a nice job!
A4K
Brigadier General
Nice work Don, and great info Ovichelu!
fubar57
General
Agreed Evan
Users who are viewing this thread
Similar threads
