Got stalled.
For some reason I picked up my CALIF AIR NAT GUARD P-51D but didn't realize I was so close to the finish onnit!
Back to this one for the finish!!!!!
Okay, I put the strut in the wing fold. The little red thingy.
To make sure the wings are at the same angle.
1. I glued the strut in place on one wing, the Starboard in this case.
2. I then used a piece of card and my handy plastic square, made onna a router,
set the card and square to the set-up wing when dry and taped in place.
3. Then after dry fitting strut then before glue is set I placed the card against the wing,
held in place with just the weight of the clamp and squared card.
4. When dry, Bob's your Uncle! Done and equal both sides!!!!!!