**** DONE: GB-56 1/48 P-47N - Thunderbolts and Lightnings (3 Viewers)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

So while Jeff and his gang of three are working I've been at the bench.
Can't sand that pesky area inside the exhaust.
So I cut some .25mm styrene to fit and glued it in.
Filed and sanded the top of the vent smooth.
And thinned all the thickness out of the openings.
Much better.
GB56 48.jpg
What compels me to lose parts, I have no idea, gotta makem
to replace them!!!!!!!
GB56 47.jpg
Now to the kitchen, Philly Cheese sangers for the boys!!!!!
 
Framing is done for the steps out front.
Tuesday is the big pour!!!! Woohoo.
So this morning, I did some cleanup on the fuselage.
Seams and such. Then the wings and horiz stabs went on.
Cleaned up all the joins and misfits, all good, easy peasy.
It's primed, light grey. So you might be wondering........
"why the big sticks that resemble a tongue"?
Well, the bomb/gas tank mounting on the center line under this thing fits inna slot.
Well, that slot has access to the Inside, and yes, one of the two pieces dropped inside!
Needs a big hole to fall thru. hence, the bigass slot. Convenient for something to hold
during painting! And now your awondering why the cockpit masking is flat?
That's because the headrest sticks up where it can be KNOCKED off see!!!!!!!!
GB56 49.jpg

But then That won't show or interfere. Black maybe tomorrow. Gotta get some Al CLad polished aluminum!
 

Users who are viewing this thread

Back