...but make sure you burnish down the edges anyway.
Geo, I tend to cut these freehand for the curves and with a ruler on the straights. I've always eliminated the doubt by staying on the line rather than inside or out. I use a sharp scalpel.
I used them on the windscreen; stuck like frightened limpets and had to add a small piece to the right quarter pane. Using my own tape for the canopy. I hope to start spraying after the Canucks disappoint me for the 32nd time
4 wins in a row!!! Did some spraying before the game. First I laid down a splotchy pattern of Vallejo White Primer and then lightly sprayed Tamiya XF-7 Red to try and break up the monotony. I might go back over some areas, not sure yet
Tried to show an over-spray of the RLM02 in the wheel wells; kinda sorta worked
Letting this setup for 24 hours and then will spray the black fuselage wings markings tonight. A bit of a concern as I sprayed the red immediately after the white so there may be paint lifting