Canopy on and the windscreen joint smoothed in as much as I care to do. Shot some Tamiya XF-24 on the frames and fear that some got in through the gun opening and fogged the inner glass. Can't be helped if so.
Tail joint blended in now and tested with paint. Works for me.
Between packing and last minute arrangements before leaving on my trip n Friday, I hope to lay down some RLM 76 and possibly even the 75 top surfaces. We'll see how it goes. Thanks for following.
Stank up the house today shooting the "RLM 76 Version 2" from AK Interactive. Nice paint but stinks like hell. Windows and doors open now hoping the smell goes away before the missus gets home.
Nice smooth finish Andy and as for the smell, I have the same problem with AK which I use for all metal finishes but spraying is done in the garage with the roller door partly up and the rear door to the garage open. lets a good draught through which is cold in winter but grand in summer when I can have the door fully open.
Nice smooth finish Andy and as for the smell, I have the same problem with AK which I use for all metal finishes but spraying is done in the garage with the roller door partly up and the rear door to the garage open. lets a good draught through which is cold in winter but grand in summer when I can have the door fully open.
Doing it all wrong Vic. Small inclosed room with no ventilation and start by knocking over a gallon of thinner, than spray and spray to your harts content!
Yes Wojtek, that garb might help a bit. Vic, good solution but doesn't work for me. My garage has both cars in it and is very dusty. I always wanted to build a paint booth exhausting to outdoors but -30C winters is a problem with how to keep the cold air out.