- Thread starter
- #21
Kyusyu J7W1 "Shinden" CGI Project
- Thread starter Shinpachi
- Start date
SaparotRob
Unter Gemeine Geschwader Murmeltier XIII
No "buts". It does look good.
GrauGeist
Generalfeldmarschall zur Luftschiff Abteilung
It looks fantastic, Shinpachi!
The discrepancy in the fitment at the wing root, is that just a slight miscalculation or was there an error in the blueprints?
The discrepancy in the fitment at the wing root, is that just a slight miscalculation or was there an error in the blueprints?
vikingBerserker
Lieutenant General
Just amazing
- Thread starter
- #26
Magnifico!
AerialTorpedoDude69
Airman 1st Class
- 290
- Mar 1, 2022
Are those spring tabs at trailing edge of the Shinden's flaps? This would give it better high-speed maneuvering. That explains why it has good high-speed maneuvering in War Thunder 
Last edited:
SaparotRob
Unter Gemeine Geschwader Murmeltier XIII
War Thunder should be trying to hire Shinpachi.
GrauGeist
Generalfeldmarschall zur Luftschiff Abteilung
Shinpachi's work is in the league of 1:1 reproduction/restoration.
Arcade garbage like WT is far beneath Shinpachi-san's talent.
SaparotRob
Unter Gemeine Geschwader Murmeltier XIII
I never said they could afford him.
- Thread starter
- #33
GrauGeist
Generalfeldmarschall zur Luftschiff Abteilung
It looks amazing, Shinpachi!
Have you fitted the four Type 5 cannon in the nose or staying true to the prototype?
Have you fitted the four Type 5 cannon in the nose or staying true to the prototype?
We need to get him a monstrous 3-D printer
- Thread starter
- #37
Thanks every one for kind comments. Here is my story for this model.
In 2004 when I began 3D modelling, I came across an excellent work of the J7W1 by Muneo Hosaka who was then one of the most famous CGI creators in Japan. As I had a set of 3-view drawings by Minoru Matsuba which I introduced in the previous page, I asked my friend who was also then a CAD operator to trace lines for me but he had given up as the lines were too much detailed and looked complicated.
Yes, I am thinking the production type of J7W1 as this is my first challenge of the model in 18 years.
J7W1 by Muneo Hosaka
In 2004 when I began 3D modelling, I came across an excellent work of the J7W1 by Muneo Hosaka who was then one of the most famous CGI creators in Japan. As I had a set of 3-view drawings by Minoru Matsuba which I introduced in the previous page, I asked my friend who was also then a CAD operator to trace lines for me but he had given up as the lines were too much detailed and looked complicated.
Yes, I am thinking the production type of J7W1 as this is my first challenge of the model in 18 years.
J7W1 by Muneo Hosaka
Excellent work so far shinpachi!
- Thread starter
- #40
A defeat of prejudice.
I thought the main landing gear was retracted by the actuator directly but did not fit in length like this image.
According to FAOW and Maru-mecha, the gear was borrowed from a C6N Saiun. So, re-challenging it. Thanks.
C6N Saiun's landing gear
I thought the main landing gear was retracted by the actuator directly but did not fit in length like this image.
According to FAOW and Maru-mecha, the gear was borrowed from a C6N Saiun. So, re-challenging it. Thanks.
C6N Saiun's landing gear
