Mitsubishi J8M1 (Army Ki-200) CGI Project (1 Viewer)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Thanks everyone.
Here are drawings to which I refer at the moment.

Wing parts
14th_wing.JPG


Front spar
15th_front_spar.JPG


Rear spar
16th_rear_spar.JPG


Spar and rib arrangement
17th_wing.JPG


Flap and slot
18th_flap_slot.JPG


Aileron and trim-flap
19th_aileron_trim-flap.JPG


Vertical-stabilizer and rudder
20th_vertical-stabilizer_rudder.JPG


J8M1_Shusui_022.JPG
 
Thank you very much, gents, for checking my clumsy work. I really appreciate.
For reference, here are drawings of the undercarriage bay I used.

Front undercarriage bay
Front_undercarriage_bay.JPG

Rear fuselage
Rear_fuselage.JPG

Rear landing gear
Rear_landing_gear.JPG

Undercarriage bay 2nd rib
Undercarriage_bay_2nd_rib.JPG


Undercarriage bay 4th rib
Undercarriage_bay_4th_rib.JPG


Undercarriage bay 8th rib
Undercarriage_bay_8th_rib.JPG

Undercarriage bay 9-10th rib
Undercarriage_bay_9-10th_rib.JPG


Undercarriage bay 9th rib
Undercarriage_bay_9th_rib.JPG


Undercarriage bay 10-11th rib
Undercarriage_bay_10-11th_rib.JPG


Undercarriage bay 11-12th rib
Undercarriage_bay_11-12th_rib.JPG


Undercarriage bay 12-13th rib
Undercarriage_bay_12-13th_rib.JPG


Undercarriage bay 13th rib
Undercarriage_bay_13th_rib.JPG


J8M1_Shusui_029.JPG
 
Last edited:
I notice that the one piece combination rear shock strut and retract unit is very similar to the one on the A6M - a very simple light weight component that replaced the separate shock and retract struts (plus associated mickey motion) used by every other manufacturer.
 
Data volume has abruptly reached my PC's rendering limitation. I think this is a good chance to finish this project now as the instruments panel was anyhow completed. Thank you very much again for checking my clumsy work everyone :salute:

J8M1_Shusui_031.JPG
J8M1_Shusui_030b.JPG
J8M1_Shusui_032.JPG
Wind_shield.JPG
Wind-shield_hinge_lock.JPG
J8M1_Shusui_033.JPG
 

Users who are viewing this thread

Back