That's excellent, Petadel, and quick! Only one minor point, if you don't mind. If it isn't too late, bin the kit seat, and scratch-build a new one, with the separate armoured back-plate, from plastic card. It had a folding, leather padded arm rest on the right (starboard) side. It's fairly straight forward, and you can use the kit part as a basic pattern. From experience of the same kit, it will look so much better. BTW, under the pilots seat, there was a 'relief' tank, virtually square, un-painted aluminium/ s.steel, roughly 8 or 10 inches dimensions. This had a 'relief tube' coming from it, which was attached by a clip to the underside of the seat. The 'pilot's' end of the tube had a cup-like nozzle (with cap!), that looked rather like an up-ended bottle, without the neck, and this was either aluminium or stainless steel. The hose was dark (black) rubber. It was visible from the floor hatch.
Hope you don't mind this observation.
Terry.