1/48 SB2C-4E Helldiver, White 80 of VB-85, U.S.S. Shangri-La

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Thanks for the comments guys, here is a small update, closing to the end!!!
I started working with the gear legs, painful job as they are a bit complicated and you need to pay a lot of attention in order everything to be lined up and in the correct position. Apart from the hydraulics wiring, i have also added small scratch details inside the wells.

P1080438_zps34a3867f.jpg


P1080443_zps8c57b5cb.jpg


P1080447_zps65c456dc.jpg


P1080449_zpsa2595cd6.jpg


P1080466_zpsd3a4cb6a.jpg


P1080467_zpsb772faa8.jpg


P1080468_zps79927975.jpg


Here with the wheels on in order to check the alignment and the symmetry.

P1080472_zpsa9f525e8.jpg


P1080479_zps117943dd.jpg


It was time for the wheel covers, it starts to show some character, dont you think so?

P1080481_zps666819f9.jpg


P1080482_zpsae46fcca.jpg


P1080487_zpsd82932cb.jpg


Next with the hook, to achieve the striped finish i cut tape into 1mm strips and i wound them carefully around the black painted hook. The even wrappings were removed and i shot the rest of the part with tamiya white.

P1080490_zpsa083451b.jpg


P1080493_zps74585196.jpg


P1080503_zps50ee541b.jpg


Some more scratch details on the gears...

P1080495_zps5a6452c9.jpg


P1080497_zps22ef0f48.jpg


Time for the bomb bay...

P1080505_zps918e2d8e.jpg


P1080510_zpsa21876fb.jpg


P1080511_zpse6c6d68b.jpg


P1080516_zps4c4afb11.jpg


Next it was time for the ultimate challenge, the flaps!!!
First it was a bit difficult to glue them in place. I have to remind you that they came from Part and they were in a lot of pieces. The solution came with the Gators grip glue, amazing stuff! I managed to glue them in position and i enhanced them with cyano glue.
Next i had to pay a lot of attention in order to have the same angle in both wings. Very painful job but i finally prevail!!

P1080520_zps280133e8.jpg


P1080522_zps8de87fa7.jpg


P1080528_zps892cd276.jpg


P1080532_zpsdbcd20f4.jpg


P1080542_zps80357977.jpg


And a general view with weight on gear...

P1080534_zps69d45d83.jpg


P1080535_zps76c28812.jpg


P1080536_zps1202c929.jpg


Thats all for now gents, till next update, have a nice week.

John
 
Good evening guys, well this is my last update as i reached the finish line with this built. But lets see the photoes!
External bomb racks...

P1080546_zps70bd5a56.jpg


P1080545_zps1ceaf0c2.jpg


P1080552_zps54f9f2f5.jpg


P1080550_zps44f063e9.jpg


On the left one i loaded the AN/APS radar..

P1080564_zpsace99ee1.jpg


P1080563_zps4987f5e3.jpg


...and i put them in place...

P1080640_zpsbaf5aa69.jpg


P1080639_zps728540d1.jpg


P1080608_zps10ecb892.jpg


P1080607_zpsc6877a91.jpg


...trim actuators..

P1080606_zps79c942f9.jpg


P1080605_zps1e47a47d.jpg


P1080604_zps08632c48.jpg


P1080601_zpsee5b5cb4.jpg


P1080600_zpscd704b13.jpg


...the tultle back...

P1080626_zps8e9b1674.jpg


P1080625_zps7b7cc408.jpg


the twin .30 gun...

P1080655_zps06a660ca.jpg


P1080653_zps92e1b32c.jpg


P1080651_zps9a52f4e5.jpg


P1080647_zps5476973b.jpg


...engine, engine cowling and antennas

P1080662_zpsedecad35.jpg


P1080660_zpsce396646.jpg


P1080659_zps5f66b55e.jpg


P1080658_zpsb5041b8d.jpg


And at last the end...

P1080740_zpsc37a80ca.jpg


P1080714_zps5f6744ac.jpg


P1080712_zps8d6af033.jpg


Thank you very much for the support all this time, hope you liked it. More photos of the finished lady at the completed section.
Cheers, lads

John
 
Last edited:

Users who are viewing this thread

Back