Gracias caballeros por sus comentarios
The wheel / hook bay:
To the rear tire I made these modifications according to real images and diagrams.
1) I did a "small dig" to look at that space that is generated between the rim and its support.
2) With wire reinforced the molding in the contour of the piece.
3) I made proportional holes with different drills in the flat structures.
4) with a No.11 blade and fine sandpaper, I cleaned the whole piece as much as possible.
With strips of styrene, steel wire and copper, ... the ribs.
The gates, details of styrene, wire and branches stretched with heat and some lines with rivets.
A side with its floodgates.
The whole set. Not noticeable, but every rib has a strip of rivets, which I hope will be noticed later ...
... how to connect the gates to the side of the fuselage? ... with my pulse, trying to do it by hand, was more than impossible, besides that I lacked an arm that applied the ETC Tamiya, while holding the two pieces with Both hands ... so I helped myself with
"artificial hands" ... :robot:
... and I went through the joint, a brushstroke of glue ... and once I did the same with the other piece ...
... so the scene shines from a distance ...
... and so the night passed; Today I hope to do the same with the left side, and then have everything ready to apply the primer and apply in interior color to all parts and cockpit.
I hope you like it and your comments are well received.
Hasta pronto y feliz fin de semana para todos