Went over all the little imperfections today and cleaned them up. Still not perfect but I'm resolved to deem these acceptable.
The louver has been cleaned up a bit and the seam at the wing root fixed. The hole in the wing root (not sure the purpose of this) was rounded out with a drill.
The port wing root was cleaned up also and I drilled a new hole here, seen in pictures but not provided in the kit. Unfortunately, when I drilled the hole, the seam opened up again and I had to redo it. The finished area is shown below but I didn't shoot any new primer on it.
The tail has had a bit of sanding done on the edges and the rivets on th etrim tabs have been knocked down to a more realistic appearance.
Ejection ports have been opened up.
Prop/Spinner was painted and assembled and the tires flattened on a hot frying pan, sanded, and painted.
Close-up of the prop after a receiving a coat of future for the decals on the blades.
Tomorrow, I plan to get the camo started after a bit of preshading. Pics then.