Harry, Harry....I don't know what I can say. Again we have to correct something instead of painting.
Look at the pic below. Two different ways of the mask sticking.The bottom part of the pic shows almost correct masked area.But I wouild like to make a focus on the red lines I marked in that. Fiest of all the strip doesn'r have to be so long.It is enough if it can start from the red lines marked near the leading edge. Also I told you that the blue tape is a little thick so you have to press the yellow one slighty down like the red bended line shows.
In the top part of the pic there is a horror. The strip is too long as well and should have started from the red line.Not pressed as well. What is more the strip is going up towards the jaws masking.But should have been down like the one on the bottom part.I suggest you have to unstick the strip cut a new on and stick it at the same position like the one in bottom part. You have to start unsticking from the front but not with the ending under the wing.You don't want to unstick the jaws masking right?
And now show my the rear sides of the fuselage with the masking tape on it.