**** DONE: Revell 1/48 P-40B RAF 112 Squadron in Egypt in 1941 MTO Group Build

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Man, you guys are just doing great and to think I was fast asleep through all nine pages of it. Good work feller and the planes coming along just dandy H.

Now I'm going to do some filling so it hardens overnight.
:hotsun: :hotsun:
 
.....
 

Attachments

  • tape.jpg
    tape.jpg
    90.9 KB · Views: 59
Last edited:
No it is not necessary. But if you could take two pics of both sides of the transitions it would be useful for me.
 
OK. Add strips of the tape as shown and press the tape good..
 

Attachments

  • tape1.jpg
    tape1.jpg
    72.8 KB · Views: 72
  • tape2.jpg
    tape2.jpg
    82.6 KB · Views: 64
No problem. Bon appetit !!!!

I have had to prepare a few shots with the instruction for sanding.

Here you are ..... you have to get pieces of the orange and black sandpaper.Not too wide or narrow. I think 1x2 inches strips will be OK. Then roll them up as shown in these pics.For initial rolling ( making a shape) you can use a pencil. Then use your own fingers and roll the strips into a pipe like you can see in the last pic.
 

Attachments

  • paper2b.jpg
    paper2b.jpg
    84.9 KB · Views: 66
  • paper2a.jpg
    paper2a.jpg
    82.7 KB · Views: 58
  • paper2.jpg
    paper2.jpg
    83.1 KB · Views: 58
  • paper1a.jpg
    paper1a.jpg
    78.6 KB · Views: 66
  • paper1.jpg
    paper1.jpg
    100.2 KB · Views: 64
Yep if you could. One pic is enough.

Here the next ones. The pipe you have to hold with your three fingers like you can see below.Don't squeeze the pipe too much.
 

Attachments

  • paper2c.jpg
    paper2c.jpg
    83.3 KB · Views: 62
  • paper2d.jpg
    paper2d.jpg
    88.5 KB · Views: 67
Last edited:
Sorry for back pics. Forgot to mention, I have a lesser grit than the black, and that is what I used for the nose yesterday, it's the gray :D
 

Attachments

  • 102_4384.JPG
    102_4384.JPG
    38.5 KB · Views: 68

Users who are viewing this thread

Back