**** DONE: Revell 1/48 P-40B RAF 112 Squadron in Egypt in 1941 MTO Group Build

[Wurger]

Looking good Harrison. I hope you have sanded down these raised areas...If not , do it . ALso I think the green colour is too dark. Add more of yellow paint and repaint these bays again.Do it to these areas sligtly going down into the fuselage as well..


And THX Bucksnort101 ...

 

[B-17engineer]

I just did actually, what do you mean down the fuselage? I will go do that.

 

[Wurger]

...

 

[B-17engineer]

Gotcha! Ah yes btw, no homework today! Woooo!

 

[Wurger]

So we can work a little bit tonight. But I have to be at work tomorrow so I have to go bed earlier indeed.

 

[B-17engineer]

Wojtek.

I almost made 2 mistakes that would've ended my modeling for good:

1) I almost washed my paint out in the new sink in our bathroom (Were getting our whole house re-done, bathrooms just finished, kitchen next.) my mom would've been SO mad.

2) Almost got paint on the digital camera....

Okay, since you must be at work tomorrow can I start the P-51 1/72 kit?

Pic 1 shows what I mix paint in. I have about 40 of those you see in the pic, from my contact lenses, very useful

 

[Wurger]

Looking very nice.The colour is better now.

Here a few corrections you have to make.

And I don't think the start of making the P-51 is a good idea.There is some work on the P-40 ahead you.

 

[B-17engineer]

That is actually something I have to sand down, near the tail, it's glue..... from when I joined the fuselage on page like...... well I don't know

So more paint? That's all?

Also, now that I have the pin vice and drill bits, what about the exhausts?

 

[Wurger]

How quick does the paint get drying?

 

[B-17engineer]

It's probably almost dry from when I applied it last.

 

[Wurger]

OK. So here you are another work to do.

 

[B-17engineer]

Oh sounds straight forward! Oh by the way, I have a big test to study for tomorrow and you will be working so I won't miss any day of modeling!

 

[Wurger]

I see.

 

[B-17engineer]

Looking OKAY

 

[Wurger]

Yep...looking good. But sand a little bit these edges where these "bridges" were to make them staright.

 

[B-17engineer]

Ok, Pics?

 

[Wurger]

Yes please.

 

[B-17engineer]

Sure, In a sec.

 

[Wurger]

 

[B-17engineer]

.