Academy Lavochkin LA-7 1/48

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

destrozas

Senior Master Sergeant
3,162
607
Jan 12, 2010
I present my first project at the forum shared with the forum of friends of Alicante, it is the well-known cast of Academy at 1 / 48.
After reviewing information about the found that it is quite wrong that has injected errors typical of the brand koreana, as poorly designed cockpit, cockpit structure and riveting shoddy Puez and bad elements studied, all will be more or less solved since after many years without noticeable inactivity layout, I put some pictures of how I carry it and you comment me what you think.




 
A nice start. But these ailerons......please, don't get me wrong .It hasn't been a good idea I'm afraid.
 
far from it I take the opposite of bad criticism are always welcome so we learn, if everything were perfectly nice and would always be the same and never would know that there are no good models.
 
The ailerons, if you sand the ribs down so they are less pronounced, could be made to look better. Sand in the direction of the airflow, taking care to make sure the edges of the added ribs where they meet the flat surface are nicely blended in.
 
what I comentais of airflow is still not finished as I have at the moment, but now with the little time I have left work I can do nothing but for the moment, that of shaping the putty I liked and will practice in a piece of plastic and then the model, I'll post a photo as they were before I believe that they are infinitely better than before.


I hope that from tomorrow I can do something to model, because I have a few hours of mastic and grout.
 
thanks,
I bring you something a few more little boxes because the subject has enough work, I put photos of before and after if it seems good to see the lace of plastic that are still cool to me.








do not know if the radiator can appreciate both the output of the input as I have placed mesh sieve 400micras light at the input and output layer to simulate the three-layer capacitor.


 
Nice build so far question where did you get those plans that you are using for it?.
 
Timewers thanks, for the truth I got from a book by a Russian publisher has plans for the LAGG-3, LA-5 (series), LA 7 and 9 of them out there are 1 / 48, the scanned and printed , Besides the modeling one of my hobbies are good books, even in a completely unknown language by the word processor I have what I translate as best I can and internet helps a lot.
Crimea river, I hope that the end is well now I have putty and sanding phase, which always fails me for a while the paint is hope for lost time and re better off
 
After the session of putty and sand it is this aspect that has remained.









and this is what they look like the wings after they take a little work, I'm expecting a liquid putty vinyl plastic looking leave


 
wurger thanks,
I put something else I've been doing, I use vallejo model color paints, as this factory a 20 minute drive from my house, because the truth is that they have used the Russian colors (AMT), because through some lists of colors that I've gone on for years get the colors:
AMT - 7 drops + 11 70990 70 992 70 951 11 + 7 drops drops
AMT - July 70 992 70 990 + 7 drops 10 drops 14 drops 70 951 +
so do the color is the closest thing to the scale
Certain amount to do so have enough paint for 3 coats to give a base color, one light and another light base color but not to cover the work done on the lights, the gray paint on the bulking is complicated but I think that has been achieved.
I have also used this time was the first time I use these metallic paints and I have been surprised by the result is a Spanish house "pictures lara" that produces a store in Valencia and are downright good.
results:














 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Similar threads

Academy 1/72 B-17E “Pacific Theater”
Replies
9
Views
769
Vic Balshaw
1/48 EA-18G Growler
Replies
14
Views
637
Donivanp
1/48 Airfix Hawker Hurricane Mk.I
2 3
Replies
43
Views
1K
fubar57
Airfix 1/48 P-51-D "Stinky"
Replies
15
Views
495
Gnomey
V
1/48 Airfix Spitfire Mk XII
3 4 5
Replies
83
Views
3K
Gnomey
Menu
Log in
Register