**** DONE: 1/48 ICM Spitfire Mk IX AE-B Ian Keltie of 402 SQDN RCAF Commonwealth GB

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Thanks Terry.

Nothing to report other than the fact that I tried to modify the cockpit seat in two ways and nothing worked to my satisfaction. So I bit the bullet and went out and ordered a pair of resin seats from Utlracast. Since shipping cost as much as the pair of seats, I added a resin spinner and 4 Rotol blades to the order, plus a wheel well mod for my FW-190 Dora for the future.

If it weren't for that crazy indentation in the bottom of that seat, I would have been fine.

I'll be off to a project site for 3 days and won't be getting at this build until probably the weekend. Talk to you then.
 
Have a good trip Andy. BTW, a quick way to cover the 'dish' in the seat, and also cover most of the seat, is to install the 'seat-type' parachute. Made from 'Milliput' and foil, it'll cover a multltude of sins !!
And of course, unless the aircraft was 'stood down', the parachute was more often than not in the seat - saved having to struggle to get the bl**dy thing on in a hurry!
 
looks great so far Andy.

i had to destroy the engine on mine as once it was fitted the top part of the cowl wouldn't fit so i had to cut off a greater part of the engine almost down to level of the exhausts !!!!
 
Definitely off to a flying start Andy and at least your new armour plate hasn't got any ejection pin marks in it. It's looking great my friend and I hope your trip away went well.
 
Thanks guys. I'm back from the far north and returned to 15cm of snow. Winter is definitely here.

Karl, I don't plan on installing the engine at all as I've read about the issues you mention. I'll just need to make up a mount for the exhausts.
 
Andy, I've found the info I new I had lurking somewhere, concerning the upper surface grey.
It was commonly referred to as 'Mixed Grey', and was made from Medium Sea Grey with 30% black added. So I was more or less right with the dark bias. New I had the info somewhere, as I used it years ago on my 1/32nd scale Spit MkIX conversion!
Hope this helps.
 
Great info Terry, thanks. The photo of Keltie's rig definitely seems to have a colour somewhere between Medium Sea Gray and Ocean Gray. Apparently before Johnson go this plane, it was repainted.

While waiting for the resin part to set on my He-219, I slapped the wings togther on this kit. Waiting on the resin seat before finishing the pit.
 
you're welcome Andy.
Been looking at my kit's seat, and think I'll just try to improve it. Need to make a start on it very soon, just have to check some final info. Finally found some SEAC decal sheets too, so ordered those.
 
The seat is defintiely "improvable" if, like you say, you can get around having to scratch build that crazy indentation on the bottom. I splurged on a pair from Ultracast as I have the ICM Mk VIII as well and the thought of doing the mod twice didn't appeal to me. So now I'll have the resin seats for both.

BTW, sent you a PM.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Similar threads

  • Sticky
**** FINISHED: 1/48 ICM Spitfire Mk IX AE-B Ian Keltie 402 SQDN RCAF Commonwealth GB
2
Replies
32
Views
14K
Crimea_River
  • Sticky
**** FINISHED: 1/48 Typhoon Mk.1B RCAF 143 16 Wing Comm 1944 Commonwealth GB
Replies
15
Views
11K
slaterat
**** DONE: 1/48 Typhoon Mk.1B RCAF 143 16 Wing Comm 1944 Commonwealth GB
7 8 9
Replies
163
Views
30K
rochie
  • Sticky
**** FINISHED: 1/48 Curtiss P-40 N "Hep Cat" 75 Sqdn RAAF Commonwealth GB
2
Replies
33
Views
13K
B-17engineer
**** DONE: 1/48 Curtiss P-40 N "Hep Cat" 75 Sqdn RAAF Commonwealth GB
5 6 7
Replies
138
Views
30K
rochie
Menu
Log in
Register