Pic 1 through 4
Sprue shots - all looks reasonable at least. There was a slight alignment problem in the molds, so some of the smaller parts are require a bit of clean up, but nothing major.
Pic 5
Interior is a light green colour as per instructions and gives paint matches in the model master range, but no exact equivalent in other ranges. A website reference (Stormo) gives Humbrol 78 + 34, which is a darker green mixed with white to get a match. To start I gave all the light green surfaces a first coat of IJA green and will use this as both a primer and pre-shade colour.
Pic 6
Here you can see progress with the top coat of interior green and some dry brushing with a 50/50 mix of the interior green and white.
Pic 7 8
The instructions call for the fuselage hatches to be cut out from the fuselage sides. Since I'm not going to be displaying them open, they are immediately covered with the hatch doors. Not sure why Italeri didn't mold them into the surface in the first place.