Neat??, fast?? what?? hahahahahaha, thanks guys. now more progress
once you leave the paint dry for 24 hours, and can be handled without problems that will not leave marks or chips or anything we proceed to put the salt on the lines of the panels that we like to feel like and see what they would have more wear, you need not give any but the metal product because this type of paint does not change or lose color to be masked with nothing
salt is iodized salt used common kitchen, salt and soy salt, three equal parts, it wets the surface and leave the salt on the surface, some grains are oriented to achieve the desired effect and allowed to dry, so the grain adiere way to the surface of the plane being firm. The use salt soy is for a reason adsorbed nitrate can be formed by salt as this can cause damage to the aircraft of very poor solution.
After complete drying 25 minutes at room these days (35 º C in the shadow), I give a pass with the airbrush with nothing more than air, so see if you jump much grain or otherwise are already well bonded to low pressure nozzle and paint well dissolved 0'2mm give last panel to panel, focusing more in some places than others so I get this result.
One advantage of these paints is that they only react with acetone or derivatives thereof, which makes it an optimal surface for any type of paint used without losing quality metallized, so that alclad II does not accept this treatment losing the look of metal.
I leave just enough time to dry the paint will not be marked and salt removal